What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 23.06.2025 23:51

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–16 [ OO OLAOYE OYEBODE ]
Upvotes:
He then asserts :
This one hit behind the barn.
There are two important concepts here.
Russia’s central bank cuts interest rates for first time since 2022 - Financial Times
This device then solves the entire problem.
The other is “what does a “fuse” do?”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
a photo is worth a thousand words.
The third is lightning and “how it gets conducted into a home.”
A fuse is a non-resetable over current circuit protector.
I post the exact comment here.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
How did you as a human being change while growing up?
nine
This is the picture of an electronic coil of wire wound around a core of magnetic material.
but I think this circuit , shows a few more pieces.
How does Arab culture and values differ from western culture and values?
In schematic diagrams this is the symbol for a fuse:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It also is a device that limits the change in current flow.
Does CloudFlare protect blackhat sites from DDOS attacks?
He then describes the function of a fuse.
The MOV will conduct when the voltage exceeds 50% of line voltage.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Roster rankings: PFF gives an ugly grade to the Browns roster - Dawgs By Nature
But… the neutral is now “floating” because of the 1 ohm resistance.
These devices are installed between the “hot” and “neutral” and protective ground.
First Sentence:
Michael Cole Reveals Which Match Will Main Event WWE Money In The Bank On Pre-Show - Wrestling Inc.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This decades-old Gmail trick is still my favorite email management hack - Android Police
Here is a simplified AC power diagram.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
An AC voltage/ current source, and an ac inductive load.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
What are your controversial and hot takes on Naruto?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–14 [Omar Gharbi Omar Gharbi ]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
‘Titan: The OceanGate Disaster’ Review: The Horrors of Hubris on Netflix - WSJ
These are simplified answers to the original question, and does not change anything I wrote above.
What is lightning?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
There are three different concepts here that are getting confused.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
[old diagram got deleted by accident]
One is “what exactly is in a ‘surge protector’ ? ”
At one ohm, the resistor has a maximum of 1 watt power.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
the problem then depends on "how fast does the fuse operate?".
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
(Dc diagram shown, AC is similar).
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–10[John johnson John Johnson ]
One
what exactly is a ‘surge’ protector?
Barnstars:
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
So, the voltage could go up to 500 volts, and the fuse will not open up.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
but this device (an Inductor) … impedes the rapid changes in the current.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then describes Rainy Season and Lightning.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
What does a fuse do?
so, what happens?
It seems Mohan does not understand the difference between a comment and an Answer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
[image of Common-mode choke]
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Because the load is inductive, the current lags the voltage.(by a bit).
A circuit breaker is similar, but is resettable.
The bolt then partially travels down the line to your home.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But it can get overloaded, and no longer works.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Edit 2024–10.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is 'the assistant's answer'
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Now when you have a certain ac resistance, then a current flows in a loop.
At least they know the answer if they wanted it.
eight
This is where the MOV conducts again, and dissipated the energy.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).